EN
AR
DE
ES
FR
PT
RU
Mahsulotlar
Aloqa
Email: [elektron pochta bilan himoyalangan]
Telefon: 0086 731 85240616
Qo'shish: 2702-xona, 2-bino, Zhongyijiujun, №29, Janubiy Junxing yo'li, Yuelu tumani, Changsha, Hunan, Xitoy.
Xitoy zavodi ASTM A213 TP316 316L issiqlik almashtirgich uchun choksiz trubka
| Kelib o'rni: | Xitoy |
| Tovar nomi: | Yasko |
| Model soni: | ASTM A213 TP316L STAINLESS STEEL SEAMLESS PIPE |
| Minimal Buyurtma miqdori: | 100KGS |
| Narx: | 3USD/KG |
| Qadoqlash Tafsilotlar: | BO'LMALARDA, yog'och yashiklarda |
| Yetkazish vaqti: | 3-15 KUNLAR |
| To'lov shartlari: | TT YOKI LC tomonidan |
| Ta'minot qobiliyati: | OYiga 3000 TON |
- MAHSULOT TARTIBI
Tez batafsil
316L stainless steel pipe is used in various industries where high temperature strength and better corrosion resistance is needed, shipyard specialist can buy from us for 316L stainless steel pipe.
Tavsif
316 stainless steel seamless pipes have better corrosion resistance than 304,as a low-carbon series of 316 steel, 316L stainless steel has the same characteristics as 316 steel, and has excellent grain boundary corrosion resistance.
OD: 0.04"- 72" (1.0 mm-1828.80 mm)
WT: 0.004"- 2" (0.1 mm-50.8 mm)
Uzunlik: 3mtrs,6mtrs,12mtrs yoki mijozlar talabiga binoan
Zichlik: 7.98 g/sm3
Tensile Strength (Mpa): ≧480
Hosildorlik kuchi: (Mpa): ≧177
Uzayish (%)≧40
Qattiqlik (HRB): ≦90
Sifat kafolati
Barcha materiallar ishlab chiqarish jarayonining turli bosqichlarida amalga oshiriladigan vayron qiluvchi va buzilmaydigan sinov usullari bilan sinovdan o'tkaziladi.
Qadoqlash va yuklash
Mijozlarimiz uchun qoniqarli mahsulotlar, qadoqlash va ajoyib xizmatni taqdim etish.
TEXNIK XUSUSIYaTNI
Product name: CHINA FACTORY ASTM A213 TP316/316L SEAMLESS TUBE FOR HEAT EXCHANGER
| shrift | Choksiz quvur, payvandlangan quvur | ||||||||||
| O'lcham | NPS 1/8"- 48" SCH: 5S,10/10S/,20,30,STD,40/40S,60,80/80S,XS,100,120,140,160,XXS OD: 0.04"- 72" (1.0 mm-1828.80 mm) WT: 0.004"- 2" (0.1 mm-50.8 mm) |
||||||||||
| uzunlik | 3mtrs,6mtrs,12mtrs yoki mijozlar talabiga binoan. | ||||||||||
| Quvur tugaydi | Oddiy uchi, qiyshiq uchi, tishli uchi. | ||||||||||
| Sirt / tugatish | Tuzlangan, mexanik sayqallangan, yorqin tavlangan, elektro sayqallangan | ||||||||||
| Viktorina: | PMI testi 50 mm uzunlikdagi cho'zilish Issiqlik bilan ishlov berish 1050℃ 5 daqiqa uchun. (WQ) ASTM A-262 Practice.E bo'yicha IGC NACE STD: NACE MR0175-MR0103 ED - 2015 Flaring test - bu ACC. ASTM A1016 Yassilash testi ACC hisoblanadi. ASTM A1016 Quvur uchlarida DPT Eddy Current testi Ultrasonik sinov Radiografiya testi (rentgen) Gidrostatik sinov |
||||||||||
| o'rash | To'plamlar, yog'och qutilar / fanera qutilari. | ||||||||||
| ariza | Neft va gazni tashish, LNG, neft-kimyo, atom energetikasi, kemasozlik, sellyuloza va qog'oz, kanalizatsiya tozalash, qurilish, tibbiyot, oziq-ovqat mahsulotlari, bezak va boshqalar. | ||||||||||
| Yetkazish vaqti | Depozitni olgandan keyin 20-60 kun yoki agar tovarlar stokda bo'lsa, 1-10 kun. | ||||||||||
| Savdo muddati | EXW, FOB, CIF yoki muzokaralar sifatida. | ||||||||||
| to'lov muddati | T / T (oldindan 30%, rasmlarni qadoqlashdan 70%) yoki muzokaralar sifatida. | ||||||||||
| Sifat talabi | Tegirmon sinovi sertifikati jo'natish bilan ta'minlanadi, uchinchi tomon tekshiruvi qabul qilinadi. | ||||||||||
| Asosiy bozor | Evropa, Janubi-Sharqiy Osiyo, Janubiy Afrika, Yaqin Sharq va boshqalar. | ||||||||||
Ostenitik zanglamaydigan po'lat quvur / quvurning mavjud navlari
| ASTM darajasi | UNS darajasi | EN darajasi | Tashqi tijorat darajasi | Xususiyatlari/Qo'llash misollari | |
| Ostenitik zanglamaydigan po'lat | 304 | S30400 | 1.4301 | - | Issiqlik almashtirgich va quvurlar uchun asosiy ostenitik zanglamaydigan po'latdir |
| 304H | S30409 | 1.4948 | - | Yuqori uglerod miqdori, quvvati va issiqlikka chidamliligi 304 dan yaxshiroqdir | |
| 304L | S30403 | 1.4307 | - | Pastroq uglerod miqdori, 304 dan ko'ra intergranulyar korroziyaga yaxshi qarshilik, yaxshi payvandlanishi | |
| 304LN | S30453 | 1.4311 | - | Azot qo'shilgan holda pastroq uglerod miqdori, yuqori quvvat. Oziqlantiruvchi suv issiqlik quvurlari uchun. | |
| Super 304 | S30432 | - | Super 304H (NSSMC) | Super 304, qozon quvurlari | |
| 321 | S32100 | 1.4541 | - | Titan tarkibiga ega, korroziyaga chidamliligi 304 ga qaraganda yaxshiroq | |
| 321H | S32109 | 1.4940 | - | Yuqori uglerod miqdori, quvvati va issiqlikka chidamliligi 321 dan yaxshiroqdir | |
| 316 | S31600 | 1.4401 | - | Cl-korroziy qarshilik | |
| 316L | S31603 | 1.4404 | - | Pastroq uglerod miqdori, 316 dan ko'ra intergranulyar korroziyaga yaxshi qarshilik, yaxshi payvandlanishi | |
| 316LN | S31653 | 1.4406 | - | Azot qo'shilgan holda pastroq uglerod miqdori, yuqori quvvat. Oziqlantiruvchi suv issiqlik quvurlari uchun. | |
| 316Ti | S31635 | 1.4571 | - | Titan tarkibiga ega, korroziyaga chidamliligi 316 ga qaraganda yaxshiroq | |
| 316LMoD/316LUG | S31603 | 1.4435 | - | Karbamid darajasi 316 | |
| 317L | S31703 | 1.4438 | - | 316 dan yaxshiroq korroziyaga chidamlilik | |
| 317 LMN | S31725 | 1.4439 | - | Azot tarkibiga ega, yuqori quvvat va strukturaning barqarorligi | |
| 310S | S31008 | 1.4845 | - | Yuqori harorat va korroziyaga qarshilik | |
| 304L | S30403 | 1.4307 | 3RE12 (Sandvik) | 3% HNO65 va undan past bo'lgan HNO3 toifali zanglamaydigan po'latning yuqori tozaligi | |
| 310L | S31002 | 1.4335 | 2RE10 (Sandvik) | 3% HNO85 va undan past bo'lgan HNO3 toifali zanglamaydigan po'latning yuqori tozaligi | |
| 310H | S31009 | 1.4821 | - | Yuqori uglerod miqdori, 310 dan yaxshiroq quvvat va issiqlikka chidamlilik | |
| 314 | - | 1.4841 | - | Yuqori kremniy tarkibi, yuqori haroratli oksidlanishga chidamliligi va o'rmalanish kuchi | |
| 310MoLN | S31050 | 1.4466 | 2RE69 (Sandvik) | Karbamid darajasi 310 | |
| 310HCbN | S31042 | - | HR3C (NSSMC) | Yuqori quvvat, yuqori haroratga chidamlilik, qozon quvurlari | |
| 347H | S34709 | 1.4942 | - | Oksidlanishga chidamli va yuqori haroratga chidamli qozon quvurlari | |
| 347HFG | S34710 | - | - | Yuqori don hajmi 347H, qozon trubkasi | |
| 904L | N08904 | 1.4539 | 2RK65 (Sandvik) | Yuqori molibden, u yuqori korroziyaga chidamliligiga ega | |
| Super ostenitik zanglamaydigan po'lat | S31254 | S31254 | 1.4547 | 254SMO (Sandvik) | 6% Mo tarkibi, yuqori chuqurlik va yoriqlar korroziyaga chidamliligi |
| N08367 | N08367 | - | AL6XN, AL6XN plus (ATI) | ||
| N08926 | N08926 | 1.4529 | - | ||
| S32652 | S32652 | 1.4652 | 654SMO (Outokumpu) | 7% Mo tarkibi, yaxshi chuqurchalar va yoriqlar korroziyaga chidamliligi | |
| S31277 | S31277 | - | - |
Ostenitik zanglamaydigan po'lat quvur / trubaning kimyoviy tarkibi
| Chelik gradus | C | Mn | P | S | Si | Cr | Ni | Mo | Ti | Nb | Ta | N | V | Cu | Ce | B | Al |
| TP304 | 0.08 | 2.0 | 0.045 | 0.03 | 1.0 | 18.0-20.0 | 8.0-11.0 | - | - | - | - | - | - | - | - | - | - |
| TP304L | 0.035 | 2.0 | 0.045 | 0.03 | 1.0 | 18.0-20.0 | 8.0-13.0 | - | - | - | - | - | - | - | - | - | - |
| TP304H | 0.04-0.1 | 2.0 | 0.045 | 0.03 | 1.0 | 18.0-20.0 | 8.0-11.0 | - | - | - | - | - | - | - | - | - | - |
| TP304N | 0.08 | 2.0 | 0.045 | 0.03 | 1.0 | 18.0-20.0 | 8.0-11.0 | - | - | - | - | 0.1-0.16 | - | - | - | - | - |
| TP304LN | 0.035 | 2.0 | 0.045 | 0.03 | 1.0 | 18.0-20.0 | 8.0-12.0 | - | - | - | - | 0.1-0.16 | - | - | - | - | - |
| Super 304 | 0.07-0.13 | 1.0 | 0.04 | 0.01 | 0.3 | 17.0-19.0 | 7.5-10.5 | - | - | 0.3-0.6 | - | 0.05-0.12 | - | 2.5-3.5 | - | 0.001-0.01 | 0.003-0.03 |
| TP309S | 0.08 | 2.0 | 0.045 | 0.03 | 1.0 | 22.0-24.0 | 12.0-15.0 | 0.75 | - | - | - | - | - | - | - | - | - |
| TP309H | 0.04-0.1 | 2.0 | 0.045 | 0.03 | 1.0 | 22.0-24.0 | 12.0-15.0 | - | - | - | - | - | - | - | - | - | - |
| TP310S | 0.08 | 2.0 | 0.045 | 0.03 | 1.0 | 24.0-26.0 | 19.0-22.0 | 0.75 | - | - | - | - | - | - | - | - | - |
| TP310H | 0.04-0.1 | 2.0 | 0.045 | 0.03 | 1.0 | 24.0-26.0 | 19.0-22.0 | - | - | - | - | - | - | - | - | - | - |
| TP310L | 0.015 | 2.0 | 0.02 | 0.015 | 0.15 | 24.0-26.0 | 19.0-22.0 | 0.1 | - | - | - | 0.1 | - | - | - | - | - |
| TP310MoLN | 0.025 | 2.0 | 0.02 | 0.015 | 0.4 | 24.0-26.0 | 20.5-23.5 | 1.6-2.6 | - | - | - | 0.09-0.15 | - | - | - | - | - |
| TP310HCbN | 0.04-0.1 | 2.0 | 0.045 | 0.03 | 1.0 | 24.0-26.0 | 19.0-22.0 | 1.6-2.6 | - | - | 0.2-0.6 | 0.15-0.35 | - | - | - | - | - |
| 1.4841/TP314 | 0.2 | 2.0 | 0.045 | 0.015 | 1.5-2.5 | 24.0-26.0 | 19.0-22.0 | - | - | - | - | 0.11 | - | - | - | - | - |
| TP316 | 0.08 | 2.0 | 0.045 | 0.03 | 1.0 | 16.0-18.0 | 10.0-14.0 | 2.0-3.0 | - | - | - | - | - | - | - | - | - |
| TP316L | 0.035 | 2.0 | 0.045 | 0.03 | 1.0 | 16.0-18.0 | 10.0-14.0 | 2.0-3.0 | - | - | - | - | - | - | - | - | - |
| TP316N | 0.08 | 2.0 | 0.045 | 0.03 | 1.0 | 16.0-18.0 | 10.0-14.0 | 2.0-3.0 | - | - | - | 0.1-0.16 | - | - | - | - | - |
| TP316H | 0.04-0.1 | 2.0 | 0.045 | 0.03 | 1.0 | 16.0-18.0 | 10.0-14.0 | 2.0-3.0 | - | - | - | - | - | - | - | - | - |
| TP316Ti | 0.08 | 2.0 | 0.045 | 0.03 | 0.75 | 16.0-18.0 | 10.0-14.0 | 2.0-3.0 | 5X(C+N) | - | - | 0.1 | - | - | - | - | - |
| TP316LN | 0.035 | 2.0 | 0.045 | 0.03 | 1.0 | 16.0-18.0 | 10.0-14.0 | 2.0-3.0 | - | - | - | 0.1-0.16 | - | - | - | - | - |
| 316LMoD/316LUG | 0.035 | 2.0 | 0.045 | 0.03 | 1.0 | 16.0-18.0 | 10.0-14.0 | 2.0-3.0 | - | - | - | - | - | - | - | - | - |
| TP317 | 0.08 | 2.0 | 0.045 | 0.03 | 1.0 | 18.0-20.0 | 11.0-15.0 | 3.0-4.0 | - | - | - | - | - | - | - | - | - |
| TP317L | 0.035 | 2.0 | 0.045 | 0.03 | 1.0 | 18.0-20.0 | 11.0-15.0 | 3.0-4.0 | - | - | - | - | - | - | - | - | - |
| TP317LM | 0.03 | 2.0 | 0.045 | 0.03 | 1.0 | 18.0-20.0 | 13.5-17.5 | 4.0-5.0 | - | - | - | 0.2 | - | 0.75 | - | - | - |
| TP317LMN | 0.03 | 2.0 | 0.045 | 0.03 | 1.0 | 17.0-20.0 | 13.5-17.5 | 4.0-5.0 | - | - | - | 0.1-0.2 | - | 0.75 | - | - | - |
| TP321 | 0.08 | 2.0 | 0.045 | 0.03 | 1.0 | 17.0-19.0 | 9.0-12.0 | - | - | - | - | 0.1 | - | - | - | - | - |
| TP321H | 0.04-0.1 | 2.0 | 0.045 | 0.03 | 1.0 | 17.0-19.0 | 9.0-12.0 | - | 4(C+N)-0.7 | - | - | - | - | - | - | - | - |
| TP347 | 0.08 | 2.0 | 0.045 | 0.03 | 1.0 | 17.0-19.0 | 9.0-13.0 | - | - | 10*C-0.01 | - | - | - | - | - | - | - |
| TP347H | 0.04-0.1 | 2.0 | 0.045 | 0.03 | 1.0 | 17.0-19.0 | 9.0-13.0 | - | - | 8*C-0.01 | - | - | - | - | - | - | - |
| 347HFG | 0.06-0.1 | 2.0 | 0.045 | 0.03 | 1.0 | 17.0-19.0 | 9.0-13.0 | - | - | 8*C-0.01 | - | - | - | - | - | - | - |
| S30815 | 0.05-0.1 | 0.8 | 0.04 | 0.03 | 1.4-2.0 | 20.0-22.0 | 10.0-12.0 | - | - | - | - | 0.14-0.2 | - | - | 0.03-0.08 | - | - |
| S31254 | 0.02 | 1.0 | 0.03 | 0.01 | 0.8 | 19.05-20.5 | 17.5-18.5 | 6.0-6.5 | - | - | - | 0.18-0.25 | - | 0.5-1.0 | - | - | - |
| 904L/N08904 | 0.02 | 2.0 | 0.04 | 0.03 | 1.0 | 19.0-23.0 | 23.0-28.0 | 4.0-5.0 | - | - | - | 0.1 | - | 1.0-2.0 | - | - | - |
| N08367 | 0.03 | 2.0 | 0.04 | 0.03 | 1.0 | 20.0-22.0 | 23.5-25.5 | 6.0-7.0 | - | - | - | 0.18-0.25 | - | 0.75 | - | - | - |
| N08926 | 0.02 | 2.0 | 0.03 | 0.01 | 0.5 | 19.0-21.0 | 24.0-26.0 | 6.0-7.0 | - | - | - | 0.15-0.25 | - | 0.5-1.0 | - | - | - |
| S32654 | - | - | - | - | - | - | - | - | - | - | |||||||
| S31277 | - | - | - | - | - | - | - | - | - | - |
Ikki tomonlama zanglamas po'latdan yasalgan quvur / quvurning mavjud navlari
| ASTM darajasi | UNS darajasi | EN darajasi | Tashqi tijorat darajasi | Xususiyatlari/Qo'llash misollari | |
| Dupleks zanglamaydigan po'lat | S32304 | S32304 | 1.4362 | SAF2304 (Sandvik) | Yaxshiroq SCC, chuqurchalar va yoriqlar korroziv va eroziyaga qarshi korroziyaga chidamliligi va yuqori quvvati, rentabellik kuchi 2 va 304 dan taxminan 316 baravar yuqori. |
| S31803 | S31803 | 1.4462 | - | S32205 ga qaraganda yaxshiroq SCC, chuqurchalar va yoriqlar korroziv va eroziyaga qarshi korroziyaga chidamliligi va yuqori quvvati, past Cr va Ni tarkibi | |
| S32205 | S32205 | 1.4462 | SAF2205 (Sandvik) | Yaxshiroq SCC, chuqurchalar va yoriqlar korroziv va eroziyaga qarshi korroziv qarshilik. | |
| Super Dupleks zanglamaydigan po'lat | S32750 | S32750 | 1.4410 | SAF2507 (Sandvik) | Oddiy dupleks zanglamaydigan po'latdan ko'ra yaxshiroq SCC, chuqurlik va yoriqlar korrozivligi va eroziyaga qarshi chidamliligi, yuqori quvvat. |
| S31260 | S31260 | - | - | ||
| S32550 | S32550 | 1.4507 | UR52+ | ||
| S32760 | S32760 | 1.4501 | Nol 100 | ||
| S32707 | S32707 | - | - | Giper dupleks zanglamaydigan po'latdan, boshqa dupleks zanglamaydigan po'latdan yoki super dupleks zanglamaydigan po'latdan ko'ra yaxshiroq SCC, chuqurlik va yoriqlar korroziv va eroziyaga qarshi chidamlilik, yuqori quvvat. |
Dupleks zanglamaydigan po'lat quvur / trubaning kimyoviy tarkibi
| Chelik gradus | C | Mn | P | S | Si | Cr | Ni | Mo | N | Cu | W | Co |
| S31200 | 0.03 | 2.0 | 0.045 | 0.03 | 1.0 | 24.0-26.0 | 5.5-6.5 | 1.2-2.0 | 0.14-0.20 | - | - | - |
| S31260 | 0.03 | 1.0 | 0.03 | 0.03 | 0.75 | 24.0-26.0 | 5.5-7.5 | 2.5-3.5 | 0.1-0.3 | 0.2-0.8 | 0.1-0.5 | - |
| S31500 | 0.03 | 1.2-2.0 | 0.03 | 0.03 | 1.4-2.0 | 18.0-19.0 | 4.3-5.2 | 2.5-3.0 | 0.05-0.1 | - | - | - |
| S31803 | 0.03 | 2.0 | 0.03 | 0.02 | 1.0 | 21.0-23.0 | 4.5-6.5 | 2.5-3.5 | 0.08-0.2 | - | - | - |
| S32001 | 0.03 | 4.0-6.0 | 0.04 | 0.03 | 1.0 | 19.05-21.5 | 1.0-3.0 | 0.6 | 0.05-0.17 | 1.0 | - | - |
| S32003 | 0.03 | 1.0 | 0.03 | 0.02 | 1.0 | 19.05-22.5 | 3.0-4.0 | 1.5-2.0 | 0.14-0.20 | - | - | - |
| S32101 | 0.04 | 4.0-6.0 | 0.04 | 0.03 | 1.0 | 21.0-22.0 | 1.35-1.7 | 0.1-0.8 | 0.20-0.25 | 0.10-0.8 | - | - |
| S32202 | 0.03 | 2.0 | 0.04 | 0.01 | 1.0 | 21.5-24.0 | 1.0-2.8 | 0.45 | 0.18-0.26 | - | - | - |
| S32205 | 0.03 | 2.0 | 0.03 | 0.02 | 1.0 | 22.0-23.0 | 4.5-6.5 | 3.0-3.5 | 0.14-0.20 | - | - | - |
| S32304 | 0.03 | 2.5 | 0.04 | 0.04 | 1.0 | 21.5-24.5 | 3.0-5.5 | 0.05-0.60 | 0.05-0.20 | 0.05-0.60 | - | - |
| S32506 | 0.03 | 1.0 | 0.04 | 0.015 | 0.9 | 24.0-26.0 | 5.5-7.2 | 3.0-3.5 | 0.08-0.2 | - | 0.05-0.3 | - |
| S32520 | 0.03 | 1.5 | 0.035 | 0.02 | 0.8 | 23.0-25.0 | 5.5-8.0 | 3.0-5.0 | 0.20-0.35 | 0.50-3.0 | - | - |
| S32550 | 0.04 | 1.5 | 0.04 | 0.03 | 1.0 | 24.0-27.0 | 4.5-6.5 | 2.9-3.9 | 0.10-0.25 | 1.5-2.5 | - | 0.5-2.0 |
| S32707 | 0.03 | 1.5 | 0.035 | 0.01 | 0.5 | 26.0-29.0 | 5.5-9.5 | 4.0-5.0 | 0.3-0.5 | 1.0 | - | - |
| S32750 | 0.03 | 1.2-2.0 | 0.035 | 0.02 | 0.8 | 24.0-26.0 | 6.0-8.0 | 3.0-5.0 | 0.24-0.32 | 0.5 | - | - |
| S32760 | 0.03 | 1.0 | 0.03 | 0.01 | 1.0 | 24.0-26.0 | 6.0-8.0 | 3.0-4.0 | 0.20-0.30 | 0.5-1.0 | 0.05-1.0 | - |
| S32906 | 0.03 | 0.8-1.5 | 0.03 | 0.03 | 0.8 | 28.0-30.0 | 5.8-7.5 | 1.50-2.60 | 0.30-0.40 | 0.8 | - | - |
Ferritik va martensitli zanglamaydigan po'latdan yasalgan quvurlar / quvurlarning mavjud navlari
| ASTM darajasi | UNS darajasi | EN darajasi | Tashqi tijorat darajasi | Xususiyatlari/Qo'llash misollari | ||
| Ferritik zanglamaydigan po'lat | 405 | S40500 | 1.4002 | - | Yuqori harorat qarshiligi, oksidlanish qarshiligi va korroziyaga chidamlilik, havo issiqlik almashinuvi trubkasi. | 700 ° C haroratda qo'llaniladi |
| - | - | 1.4724 | SIC9(Sanyo)/1C256(Sandvik) | 850 ° C haroratda qo'llaniladi | ||
| 430 | S43000 | 1.4016 | - | 800 ° C haroratda qo'llaniladi | ||
| - | - | 1.4742 | SIC10(Sanyo)/1C356(Sandvik) | 1000 ° C haroratda qo'llaniladi | ||
| - | - | 1.4762 | SIC12 (Sanyo) | 1150 ° C haroratda qo'llaniladi | ||
| - | - | - | QS25T (Sanyo) | 1100 ° C haroratda qo'llaniladi | ||
| TP446-1/TP446-2 | S44600 | 1.4749 | 2C52/2C48 (Sandvik) | Havoda yuqori haroratli oksidlanish korroziyasi, oltingugurtli gazlarni kamaytirishga yaxshi qarshilik, eritilgan Cu, Al va Zn, havo issiqlik almashinuvi quvurlariga qarshilik. | 1000-446 uchun 1 ° C va 1075-446 uchun 2 ° C haroratda ishlatiladi | |
| 439 | S43035 | 1.4510 | - | SCC korroziyasiga yaxshi qarshilik, issiqlik almashtirgich trubkasi. | ||
| 444 | S44400 | 1.4521 | - | |||
| Super Ferritik zanglamaydigan po'lat | S44660 | S44660 | - | Dengiz davosi (Plimut trubkasi) | Xlorid chuqurligi va yoriq korroziyasiga yaxshi qarshilik, SCCga qarshi immunitet, yaxshi eroziyaga chidamlilik, yuqori issiqlik o'tkazuvchanligi va past issiqlik kengayishi Tuzsizlantirish, quvvatli dengiz suvi kondensator quvurlari. |
|
| S44735 | S44735 | - | AL29-4C(ATI) | |||
| S44736 | S44736 | - | AL29-4-2 (ATI) | |||
| Martensitli zanglamaydigan po'lat | 410S | S41008 | 1.4000 | - | Past korroziyaga chidamlilik, past termal kengayish, issiqlik almashinuvi quvurlari. | |
| 410 | S41000 | 1.4006 | - | |||
| 420 | S42000 | 1.4021 | API/13Cr 180 | Issiqlik bilan ishlov berish bilan qattiqlashtirilgan, yuqori qattiqlik. | ||
| 420J2 | S42000 | 1.4028 | - | |||
| 431 | S43100 | - | - | |||
| 17-4PH | S17400 | 1.4542 | - | Yog'ingarchilik bilan qattiqlashtiruvchi martensitik zanglamaydigan po'lat, yuqori quvvat. | ||
| Super Martensitik zanglamaydigan po'lat | 13Cr110 | S41426 | 1.4313 | SM13CRS (NSSMC) | Yuqori quvvat, yaxshi korroziyaga chidamlilik, API yog'i va korpus trubkasi yoki muftasi. | |
| - | - | 1.4418 | - | |||
| 17Cr110/125 | - | - | SM17CRS (NSSMC) | |||
Ferritik va martensitik zanglamaydigan po'lat quvur / trubaning kimyoviy tarkibi
| Standard | Chelik gradus | C | Mn | P | S | Si | Cr | Ni | Mo | N | Nb | Ti | Al | Cu |
| A/SA268 | TP405 | ≤0.08 | ≤1.00 | ≤0.040 | ≤0.030 | ≤1.00 | 11.5-14.5 | ≤0.50 | - | - | - | - | 0.1-0.3 | - |
| A/SA268 | TP410 | ≤0.15 | ≤1.00 | ≤0.040 | ≤0.030 | ≤1.00 | 11.5-13.5 | - | - | - | - | - | - | - |
| A/SA268 | TP410S | ≤0.08 | ≤1.00 | ≤0.040 | ≤0.030 | ≤1.00 | 11.5-14.5 | - | - | - | - | - | - | - |
| A/SA268 | TP430 | ≤0.12 | ≤1.00 | ≤0.040 | ≤0.030 | ≤1.00 | 16.00-18.00 | - | - | - | - | - | - | - |
| A/SA268 | TP430Ti | ≤0.10 | ≤1.00 | ≤0.040 | ≤0.030 | ≤1.00 | 16.00-19.5 | ≤0.75 | - | - | - | 5C-0.75 | - | - |
| A/SA268 | TP446-1 | ≤0.20 | ≤1.50 | ≤0.040 | ≤0.030 | ≤1.00 | 23.00-27.00 | ≤0.75 | - | 0.25 | - | - | - | - |
| A/SA268 | TP446-2 | ≤0.12 | ≤1.50 | ≤0.040 | ≤0.030 | ≤1.00 | 23.00-27.00 | ≤0.50 | - | 0.25 | - | - | - | - |
| A/SA268 | TP409 | ≤0.08 | ≤1.00 | ≤0.045 | ≤0.030 | ≤1.00 | 10.50-11.70 | ≤0.50 | - | - | - | 6C-0.75 | - | - |
| A/SA268 | TP439 | ≤0.07 | ≤1.00 | ≤0.040 | ≤0.030 | ≤1.00 | 17.00-19.00 | ≤0.50 | - | 0.04 | - | 0.2+4(C+N)-1.1 | - | - |
| A/SA268 | TP444 | ≤0.025 | ≤1.00 | ≤0.040 | ≤0.030 | ≤1.00 | 17.50-19.50 | ≤1.00 | 1.75-2.5 | 0.035 | - | (Ti+Cb):0.2+4(C+N)~0.8 | - | - |
| A/SA756/268 | 440C | 0.95-1.10 | ≤1.00 | ≤0.025 | ≤0.025 | ≤1.00 | 16.00-18.00 | - | 0.4-0.7 | - | - | - | - | - |
| A/SA693 | 17-4PH | ≤0.07 | ≤1.00 | ≤0.040 | ≤0.030 | ≤1.00 | 15.50-17.50 | 3.0-5.0 | - | - | 0.15-0.45 | - | - | 3.0-5.0 |
| GOST9941-81 | 15Cr25Ti | ≤0.15 | ≤0.80 | ≤0.035 | ≤0.025 | ≤1.00 | 24.00-27.00 | - | - | - | - | 5C-0.90 | - | - |
| API 5CT | L80/9Cr | ≤0.15 | 0.30-0.60 | ≤0.020 | ≤0.010 | ≤1.00 | 8.00-10.00 | - | 0.9-1.1 | - | - | - | - | - |
| API 5CT | L80/13Cr | 0.15-0.22 | 0.25-1.00 | ≤0.020 | ≤0.010 | ≤1.00 | 12.0-14.0 | - | - | - | - | - | - | - |
| EN10088-1 | 1.4724 | ≤0.12 | ≤1.00 | ≤0.040 | ≤0.015 | 0.70-1.40 | 12.0-14.0 | - | - | - | - | - | 0.7-1.2 | - |
| EN10088-1 | 1.4742 | ≤0.12 | ≤1.00 | ≤0.040 | ≤0.015 | 0.70-1.40 | 17.0-19.0 | - | - | - | - | - | 0.7-1.2 | - |
| EN10088-1 | 1.4762 | ≤0.12 | ≤1.00 | ≤0.040 | ≤0.015 | 0.70-1.40 | 23.0-26.0 | - | - | - | - | - | 1.2-1.7 | - |
| A/SA268 | S44660 | ≤0.030 | ≤1.00 | ≤0.040 | ≤0.030 | ≤1.00 | 25.0-28.0 | - | 3.0-4.0 | 0.04 | - | (Ti+Cb)=0.2~1.0 va ≥6(C+N)~0.8 | - | - |
| A/SA268 | S44735 | ≤0.030 | ≤1.00 | ≤0.040 | ≤0.030 | ≤1.00 | 28.0-30.0 | ≤1.00 | 3.6-4.2 | 0.045 | - | (Ti+Cb)=0.2~1.0 va ≥6(C+N)~0.8 | - | - |
Aloqa
